How to remove NailLift on Gel Nail
Before & After attaching.
You can see NailLift could be attached properly, and it is corrected immediately after
attaching. In the case of thick nails, correction will further proceed in about 1 week.
On the right picture, we coat clips with transparent Gel Nail. Gel Nail retains its elasticity
even after it is dry, so the corrective power of wire will be kept.
Clips coated with Gel Nail can be removed as long as you file off Gel Nail on the black side of dedicated file until the surfaces of clips are exposed.
I explain colored Gel Nail. You will be easier to find how the clips are exposed.
The left picture is before filling, and the right is after filling the Gel Nail off until surfaces of
clips are exposed.
As shown in the left picture, insert a thin metal tool such as a flathead screwdriver or
tweezers to clip, and pull it strongly toward.
It will be easy to remove clips by hold your finger firmly.
What is used in this picture is a NailLift remover. This is enclosed with the nipper which we
offer. This remover can also be used to clean dust on nails.
The right picture is after clips removed. In the case you apply transparent Gel Nail, the
trace of clips will be unseen if file Gel Nail off by the black side of dedicated file and then
finish it with the white side.
If you still care about Gel Nail remaining on nail, please follow the procedure below using a
nail polish remover.
1. Scratch entirely the surface of Gel Nail.
2. Cut cotton or tissue paper to the size of nail, place it on the nail, and pour nail polish
remover on it.
3. Wrap with aluminum foil and wait for about 15 minutes.
4. As Gel Nail is softened, remove clips and peel gently with the rounded tip of NailLift
remover.
5. Wash nails and fingers carefully with soap.
since 1995.05.10